Rugby Clock Parts List
Jump to navigation
Jump to search
Rugby Clock - Parts List
List of parts used in the Rugby Clock Circuit and other parts required.
| Part | Description |
|---|---|
| R1 | 1 K |
| R2 | 10 K |
| VR1 | 47 K Preset |
| C1 | 3.3 uF |
| C2, C3 | 68 pF |
| LED1 | 5mm Green LED |
| LED2, LED3 | 3mm 5v Red LED |
| X1 | 4MHz Crystal |
| IC1 | 7805 5v Regulator |
| IC2 | PIC 16F873-04 |
| FCC68 6pin Socket | |
| EM2 MSF Receiver | |
| MSF Antenna | |
| PL1602F LCD Display | |
| Strip board | |
| PP3 Battery | |
| PP3 Clip |
- Also Required: Wire, heat shrink sleeve, solder and PCB pins.
- I didn't use a box, but for a permanent clock you'll probably want one.
Total cost for the listed parts is about £50